EDT EX-RAY, Руководство пользователя

Страница: 22 / 72

SPEED Sensor BOLT Installation
BOLT SENSOR - AXLE Mount:
Remove the Drivers side wheel,
SUPPORT WITH SAFETY
JACK
CAUTION: DO NOT PERFORM
THIS PROCEDURE ALONE.
ENSURE A STABLE SAFE
WORK ENVIRONMENT.
Mount the 6mm x 19mm Magnet
bolt. Some brackets may re-
quire the extra 6mm “Jam Nut”.
DO NOT OVER TIGHTEN this
bolt. It only needs to support
its own weight.
Position the Clamp head and
magnet bracket OPPOSITE of
each other onto the wheel hub
and tighten clamp. This will off-
set any weight balance.
10mm BOLT SPEED Sensor Installation (Most all):
Speed sensor is a magnet and wheel speed sensor. The sensor
mounted on the steering knuckle and magnet on the rotating
wheel. Various small brackets are supplied best suit your applica -
tion. EZ-GO shown below. YAMAHA & ClubCar & Jakes Disc
following pages. SHORT HUBS require special bracket (pg 25).
22