Trouble Shooting / FAQ
The screen is cracked or hazed.
•
Did gasoline, de-greasers, or other chemical cleaners come
in contact with the EX-RAY’s screen? Some chemicals can
damage the display or finish of the EX-RAY.
The backlight won’t stay on.
•
EX-RAY requires external power to the vehicles 12-48 volt
electrical (ignition switched and fused) in order for the back
-
light to be continuously on. Review installation procedure
(See POWER WIRE installation section)
EX-RAY’s internal battery is dead.
•
To replace the battery, use a small coin to unscrew the round
panel on the back of the EX-RAY. Remove and properly
dispose of the spent battery. Install a new battery of the
same make. Make sure the POSITIVE POLE IS FACING
UP. Replace with common watch style battery CR2302. See
Parts and Features Section.
Why aren’t the LED’s working?
•
EX-RAY requires external power from the vehicles 12 volt
electrical (ignition switched and fused) in order for the LED’s
to function. Review installation procedure (See POWER
WIRE installation section)
•
In Electric Vehicles, this voltage must be supplied by a fuzed
circuit after the Key Switch. Battery voltages range from 12,
24, 36, and 48Vdc. This product will not work greater than
48Volt battery systems (<60Vdc) and may cause damage.
•
Temperature limit settings must be programmed manually.
See Data Setting Section for details.
64
Содержание EX-RAY
Страница 6: ...Specifications 6...
Страница 7: ...7 Specifications...
