EDT EX-RAY, Руководство пользователя

Страница: 17 / 72

Club Car with plastic cover:
(MCCP and MXRT Models)
Tighten the bottom 6mmx40mm
bolts as shown on the previous
page.
Insert the two 6mmx20mm (or
6mmx25mm bolts, which ever
came with your kit) into the
45 degree staking holes. Hand
tight them to just touch the plastic
tube. Then making sure the display
is straight up, 1/4 turn each bolt
side. Do not overtighten.
The display should be inside the
steering wheel window. If the dis-
play is too high, move it farther
away down the steering column
and tighten.
Note:
Some stainless steering cov-
ers differ in size. The tube may
need to be cut to allow the EX-RAY
to fit directly onto the steel steering
column. Measure tube diameter.
Steering Column Mount:
Some Club Car models utilized plastic tube covers. The
diameter of the CNC bracket accounts for this tube and uses
45 degree “Stake bolts” which lock the display in place. This
process will “ding” the plastic tube permanently, but neces-
sary to lock the display in place.
Display Installation
17