EDT EX-RAY, Руководство пользователя

Страница: 24 / 72

SPEED Sensor BOLT Installation
BOLT SENSOR-AXLE Mount
(Most all):
Route the cable to prevent contact with
the wheel. The full LEFT and full RIGHT
turn stops should be checked to ensure
the cable is not pinched, binds, or rubs.
CAUTION: THE CABLE MUST NOT
CONTACT THE MOVING STEERING
KNUCKLE OR TIRE!
Secure the cable with cable clamps.
Watch for CHAFFING points that may
damage the cable. Always use TWO
cable ties side by side (should one break
in the future)
ROTATE THE STEERING FULL LEFT
LOCK TO FULL RIGHT LOCK, CHECK
FOR CABLE PINCH HAZARDS!
Feed the connector over the TOP of the
steering column. Let cable hang for now.
(as shown in the Temp Extension Cable
Installation section)
24