EDP i-BOX Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 57

background image

Installation & User Guide

i-BOX Installation And User Guide_V4.2.6

Page 11 of 57

i-BOX System Features and Benefits.

Combining the i-BOX and i-PAL systems together provides a new generation of access control and monitoring
solution designed with installer and end-user in mind. The system design (sensors, controllers, readers etc)
incorporates cutting edge technologies allowing units to be small and compact. The system structure is modular,
which means you only pay for what you need.

The system has true plug and play (PnP) functionality allowing easy intuitive configuration even for the first time
user. For instance i-BOX automatically recognises when a new sensor or handle is connected and opens a “New
Item Wizard” to guide you through the setup. A key development driver was the goal of reducing installation
times and therefore reducing the total cost of ownership.

Consideration has been given to everyday issues such as electrical spikes or incorrect wiring and wherever
possible these concerns or issues have been engineered out of the design.

This document describes many of the hidden automated features of the AX200 Series software – you would only
normally realise their existence if you have experienced some of the issues with other systems. If you have then
we are sure that you will realise the amount of time and frustration you will save by using the i-BOX Series of
plug and play access control systems.

Computer Requirements.

We support only the following minimum system configuration for the i-BOX.

Minimum Software and Hardware Requirements



CPU: Intel Pentium PII or higher (400Mhz)



RAM: Memory 128MB Minimum



CD-Drive: 16x or faster



Hard Drive: 500MB hard-disk space



Operating System: Windows 98SE, 2000, NT, ME



Display – Classic Mode: 800 x 600 or higher



Graphics Mode XP: 1024 x 768 65,535 colours



Printer: Supports all Windows compatible printers

NOTE: The faster the PC, the better the application will respond.

PC’s not meeting the above specification are excluded from technical support and the software will not install.

The i-BOX has been extensively tested on Windows 95, 98SE, 2000, NT, ME & XP in combination with other
software packages e.g. Microsoft Office 2000. No responsibility can be accepted for conflicting software running
on the same PC.

Kalkenstraat 91-93 B-8800 Roeselare (Roulers) - Belgium

Tel. +32(0)51/25.06.10 Fax +32(0)51/24.02.57

Email: [email protected] website: www.rack19.be or www.eldeco.be or www.eldeco-edp.eu

«
...
9
10
11
12
13
...
»

Содержание i-BOX


























































Отзывы:

Нет отзывов

Похожие инструкции для i-BOX

Бренд: Makita Страницы: 8

Бренд: VECTECH Страницы: 5

Бренд: CAE Healthcare Страницы: 108

Бренд: Cannon Страницы: 36

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: Garelick Страницы: 2

Бренд: Garelick Страницы: 2

Бренд: HALDER Страницы: 2

Бренд: Hakko Electronics Страницы: 16

Lab companion SI-300

Бренд: Jeio tech Страницы: 69

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 4

Бренд: Jct Страницы: 16

Бренд: Malekko Страницы: 2

Бренд: Major Страницы: 26

Monolith NT.115

Бренд: Nano Temper Страницы: 24

SCAFFOLDBENCH I-CISRL

Бренд: MetalTech Страницы: 16

Бренд: Eleiko Страницы: 24

Бренд: Horizon Fitness Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды