Installation & User Guide
i-BOX Installation And User Guide_V4.2.6
Page 41 of 57
Door Contact Settings
A standard door contact (normally open), as used in alarm systems, can be connected to the controller. The door
status can then be seen in real time on the screen (on line only) and a number of additional features can be
selected.
Door contact
On or off selection.
Door forced
If the door is opened without the REX or a valid card, this will generate an alarm.
When online to the PC, this will show on the transaction screen allowing a remote
reset. The reader sounder will activate for 2 minutes and automatically stop. Resets
can also be done using a valid card. When the door is closed it automatically
enables the feature again.
Sounder Disable
Allows you to disable the local audible alarm. Can be used when the installation is
in a confined location and where the noise could be irritating.
Reader off when open
The reader will be disabled (not the REX) if the door contact is open. This feature
can be used for alarm systems e.g. the alarm is on so the door cannot be opened,
Parking application - there is no car on the presence loop, so the barrier cannot be
activated by a pedestrian or for air locks, one of the two doors is open so the
second remains closed.
Door held open alarm
The length of time the door is allowed to be open before an alarm is generated.
Local door held open
This is a local alarm activating the integral sounder built in to the reader and does
not send an alarm to the PC (if online) This feature is normally used in conjunction
with the door held open alarm and warns people local to the door to close the door
or a full alarm will be raised.
Relay reset
De-activates the relay timer instantly when the door is opened. This increases
security avoiding an unlocked door for a number of seconds whilst the person has
already gone through the door.
Kalkenstraat 91-93 B-8800 Roeselare (Roulers) - Belgium
Tel. +32(0)51/25.06.10 Fax +32(0)51/24.02.57
Email: [email protected] website: www.rack19.be or www.eldeco.be or www.eldeco-edp.eu