EDP i-BOX Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 57

background image

Installation & User Guide

i-BOX Installation And User Guide_V4.2.6

Page 40 of 57

Door Release Time

Three different settings:

Door release time (1 to 255 seconds)

The amount of time the door is open if a valid card is used.

Extended time (1 to 255 seconds)

Allow individual cardholders to have the door open for a longer
period of time e.g. disabled or elderly people.

Request to Exit (1 to 255 seconds)

This time can be individually set and is often set longer when the
REX is used at the reception allowing visitors a slightly longer
entry time.

When the REX button is used, the reader fitted outside can be set to sound twice to indicate the door has been
released for visitors. This feature is particularly useful when used with magnet locks since their operation is
totally silent.

Start-up Mode Settings

The start-up mode setting enables you to determine how the door operates in case of total power failure,
including exhaustion of the battery back up. All the data is stored permanently in the controller for up to 100
years without the need for any power, and upon power-up will continue to operate without the need for a
database download.

High security mode

Only cardholders with the high security mode enabled will have access.

Normal mode

Returns to normal mode from whatever the status was prior to power failure.

Door unlocked

The door unlocks permanently until a valid card with the unlock feature is used
twice, or the door is changed to normal mode from the PC.

Last known mode

This will return to the status the door was set to prior to power failure.

Kalkenstraat 91-93 B-8800 Roeselare (Roulers) - Belgium

Tel. +32(0)51/25.06.10 Fax +32(0)51/24.02.57

Email: [email protected] website: www.rack19.be or www.eldeco.be or www.eldeco-edp.eu

«
...
38
39
40
41
42
...
»

Содержание i-BOX


























































Отзывы:

Нет отзывов

Похожие инструкции для i-BOX

Бренд: Rangevision Страницы: 31

Бренд: ParaBody Страницы: 4

Бренд: iGuzzini Страницы: 20

BTL PA0400 Series

Бренд: Balluff Страницы: 22

Micropulse BTL5 Series

Бренд: Balluff Страницы: 12

BNI IOW-560-W01-K022

Бренд: Balluff Страницы: 32

Бренд: Baltic Страницы: 68

Бренд: Baltic Страницы: 68

Max Charge MC-612

Бренд: Balmar Страницы: 12

BTL PA0400 Series

Бренд: Balluff Страницы: 204

Бренд: p-light Страницы: 28

Бренд: Rane Страницы: 38

Бренд: Kartsana Страницы: 36

Бренд: UEi Страницы: 5

Бренд: UGO BASILE Страницы: 47

Бренд: UFO Страницы: 16

Бренд: Yamaha Страницы: 48

Бренд: Yamaha Страницы: 85

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды