Edgewater Networks 318CC, Руководство для владельца

Страница: 204 / 213

GB
SPECIFICATIONS
Bowl, seat and cover
Hygienic white glazed vitreous china bowl for
ease of cleaning.
Luxury wooden seat and cover with tough
baked enamel coating.
Flush pump
Internally mounted, high speed, non-clogging,
centrifugal, waste macerating pump driven by
powerful 240 watt, 12 or 24 Vdc, permanent
magnet motor with ball bearings and robust
ceramic seal, discharges up to 6ft (2m) above
the base of the toilet.
Either Solenoid Valve
Jabsco solenoid valve and syphon breaker
assembly for connection to any existing
pressurised water system capable of delivering
2.9gpm (11 lpm) or more. The syphon breaker
ensures that there is no backflow from the toilet
into the water system.
Or Rinse pump
Jabsco, self-priming up to 3m (10ft), dry
running, diaphragm water pump driven by 12 or
24 Vdc, permanent magnet, ball bearing motor.
Control Panel
One Touch 'Press and Release' switch pad,
sealed for life, with 10ft (3m) link cable, fitted
quick connector, and heat shrink seal.
Control Box
Sealed for life, with external leads to ship's 12 or
24 Vdc Positive and Negative power supply, to
Flush pump and to either Solenoid Valve or
Rinse Pump, plus 6 way quick connector input
from Control Panel. Reverse polarity protected,
computer controlled circuitry with heavy duty
mechanical relays for ultra reliability.
Standards
Complies with ISO8846 MARINE [Ignition
protection].
Ports
Raw Water Rinse pump inlet & outlet, and Toilet
Rinse inlet - ¾" (19mm) hose tails.
Fresh Water Rinse solenoid valve inlet - choice
of ½" (13mm) hose tail or ½" (13mm) male
thread. Outlet - ¾" (19mm) hose tail.
Flush pump discharge - 1½" (38mm) hose tail.
The Deluxe Flush toilet
range features a multi-
function 'one touch' control
pad offering four options -
'Fill', 'Quick Flush', 'Flush'
or 'Empty'.
In addition, the owner can set the control at any
time so that the bowl is left either 'Dry' or 'Wet' after
flushing. The recommended 'Dry' setting minimises
total water usage. If water usage is not a concern,
the 'Wet' setting automatically adds 1 quart (1 litre)
of water after flushing, ready for the next user.
Simultaneously holding down both 'Quick Flush'
and 'Flush' buttons for 5 seconds switches between
bowl always left 'Dry' and bowl always left 'Wet'
modes.
'Fill' may be touched when the bowl is 'Dry' to
add 1 quart (1 litre) of water before use, if
thought necessary.
'Quick Flush' first rinses and then empties the
bowl after light use. On 'Dry' setting, this uses
less than 1 quart (1 litre) of water.
'Flush' rinses and empties the bowl twice after
heavy use. If the bowl is 'Dry', touching 'Fill' first
is recommended. This uses just 2.5 quarts
(2.5 litres) of water.
'Empty' does exactly what it says without adding
any water, whenever desired.
Even when the bowl is apparently 'dry', there is an
anti-odour water lock in the pump housing.
APPLICATIONS
You may install JABSCO Deluxe Flush electrically
operated marine toilets in both power and sailing
craft, either above or below the waterline, for use on
sea, river, lake or canal.
Your installation may discharge the waste either
overboard (provided that your national and local
regulations allow this), or into a treatment system or
into an on-board holding tank (U.S.C.G. Marine
Sanitation Devices Type I, II and III).
TOUCH PAD CONTROLLER
Caution! JABSCO electricl toilets are designed
specifically for marine use. Consult ITT Industries
Jabsco for advice about possible non-marine
applications.
* * * * *
* * * * *
2
Caution! Jabsco electrical toilets are designed
VSHFL¿FDOO\IRUPDULQHXVH&RQVXOW-DEVFRIRU
DGYLFHDERXWSRVVLEOHQRQPDULQHDSSOLFDWLRQ