Edge-Core ECS4660-28F Скачать руководство пользователя страница 986

Страница: 986 / 2020

HAPTER

| System Management Commands

Synchronous Ethernet

– 986 –

◆

If the switch is changed from SSM mode to Manual mode, and a port

has been chosen as the active clock source in SSM mode, this port will

still be the active clock source in Manual mode. If no clock source port

has been selected in SSM mode, the local clock will be used as the

active clock source.

◆

If the switch is changed from Manual mode to SSM mode, and a port

has been chosen as the active clock source in Manual mode, this port

will no longer be the active clock source. All clock source ports

configured under Manual mode will be removed. The new active clock

source is determined as described under the first item in this section.

◆

If the switch is changed from Manual mode to SSM mode using the

form of this command, and a port has been chosen as the active clock

source in Auto mode, this port will be the active clock source in Manual

Mode. If there is no active clock source in Auto mode, the local clock

will be used as clock source in Manual mode. All ports configured as

clock source ports under Auto mode will be kept after changing to

Manual mode.

Link State Changes

◆

If an SSM-enabled port links up, the new active clock source is

determined as described under the first item in this section.

◆

If SSM-chose clock source port goes down, the switch will choose the

next clock source port as described under the first item in this section.

If no other port can be used as the clock source port, the local clock will

be used as the active clock source.

Joining a Trunk

◆

If an SSM-enabled port is added to a trunk, and the trunk is not

operating at 1Gbps (full duplex), this port will no longer process SSM,

and cannot be used a clock source port.

XAMPLE

Console(config)#synce ssm ethernet 1/25

Console(config)#synce ssm ethernet 1/26

Console(config)#synce ssm ethernet 1/27

Console(config)#synce ssm ethernet 1/28

Console(config)#

synce clk-src-ssm

This command uses SSM to select the clock source according to the SSM

quality level, priority and port number. Use the no form to disable this

function.

YNTAX

[

]

synce clk-src-ssm

EFAULT

ETTING

Disabled

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4660-28F

Отзывы:

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 986 / 2020

Результаты поиска

Содержание ECS4660-28F

Отзывы: