Edge-Core ECS4660-28F, Руководство по управлению, Страница: 1905 / 2020

C
HAPTER
51
| IP Routing Commands
Policy-based Routing for BGP
– 1905 –
E
XAMPLE
Console(config)#route-map RD permit 5
Console(config-route-map)#match ip next-hop rd-next-hops
Console(config-route-map)#set weight 30
Console(config-route-map)#
match ip
route-source
This command specifies the source of routing messages advertised by
routers and access servers to be matched in a standard access list, an
extended access list, or a prefix list. Use the no form to remove this entry
from a route map.
S
YNTAX
match ip route-source { access-list-name |
prefix-list prefix-list-name }
no match ip route-source [ access-list-name | prefix-list ]
access-list-name – Name of standard or extended access list.
(Maximum length: 32 characters, no spaces or other special
characters)
prefix-list-name – Name of a specific prefix list.
C
OMMAND
M
ODE
Route Map
C
OMMAND
U
SAGE
Note that there may be situations in which the next hop and source router
address of the route are not the same.
E
XAMPLE
Console(config)#route-map RD permit 6
Console(config-route-map)#match ip route-source rd-sources
Console(config-route-map)#set weight 30
Console(config-route-map)#
match metric
This command sets the metric value to match in routing messages. Use the
no form to remove this entry from a route map.
S
YNTAX
match metric metric-value
no match metric
metric-value – The metric value in the routing messages.
(Range: 0-4294967295)
C
OMMAND
M
ODE
Route Map