Edge-Core ECS4660-28F, Руководство по управлению, Страница: 879 / 2020

C
HAPTER
22
| Using the Command Line Interface
CLI Command Groups
– 879 –
CLI C
OMMAND
G
ROUPS
The system commands can be broken down into the functional groups
shown below
.
Table 57: Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
883
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, the system clock, and switch clustering
891
Simple Network
Management Protocol
Activates authentication failure traps; configures
community access strings, and trap receivers
995
Remote Monitoring Supports statistics, history, alarm and event groups 1017
Flow Sampling Samples traffic flows, and forwards data to designated
collector
1025
User Authentication Configures user names and passwords, logon access
using local or remote authentication, management
access through the web server, Telnet server and Secure
Shell; as well as port security, IEEE 802.1X port access
control, restricted access based on specified IP
addresses, and PPPoE Intermediate Agent
1031
General Security
Measures
Segregates traffic for clients attached to common data
ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
1089
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, next
header type, or flow label), or non-IP frames (based on
MAC address or Ethernet type)
1163
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
1187
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
1215
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
1229
Congestion Control Sets the input/output rate limits, traffic storm thresholds,
and thresholds for broadcast and multicast storms which
can be used to trigger configured rate limits or to shut
down a port.
1239
Automatic Traffic Control Configures bounding thresholds for broadcast and
multicast storms which can be used to trigger configured
rate limits or to shut down a port
1207
Loopback Detection Detects general loopback conditions caused by hardware
problems or faulty protocol settings 1259
UniDirectional Link
Detection
Detect and disables unidirectional links 1265
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
1271