Edge-Core ECS4660-28F Скачать руководство пользователя страница 370

Страница: 370 / 2020

HAPTER

| Security Measures

Network Access (MAC Address Authentication)

– 370 –

For example, the attribute “service-policy-in=pp1;rate-limit-

input=100” specifies that the diffserv profile name is “pp1,” and the

ingress rate limit profile value is 100 kbps.

◆

If duplicate profiles are passed in the Filter-ID attribute, then only the

first profile is used.
For example, if the attribute is “service-policy-in=p1;service-policy-

in=p2”, then the switch applies only the DiffServ profile “p1.”

◆

Any unsupported profiles in the Filter-ID attribute are ignored.
For example, if the attribute is “map-ip-dscp=2:3;service-policy-

in=p1,” then the switch ignores the “map-ip-dscp” profile.

◆

When authentication is successful, the dynamic QoS information may

not be passed from the RADIUS server due to one of the following

conditions (authentication result remains unchanged):

■

The Filter-ID attribute cannot be found to carry the user profile.

■

The Filter-ID attribute is empty.

■

The Filter-ID attribute format for dynamic QoS assignment is

unrecognizable (can not recognize the whole Filter-ID attribute).

◆

Dynamic QoS assignment fails and the authentication result changes

from success to failure when the following conditions occur:

■

Illegal characters found in a profile value (for example, a non-digital

character in an 802.1p profile value).

■

Failure to configure the received profiles on the authenticated port.

◆

When the last user logs off on a port with a dynamic QoS assignment,

the switch restores the original QoS configuration for the port.

◆

When a user attempts to log into the network with a returned dynamic

QoS profile that is different from users already logged on to the same

port, the user is denied access.

◆

While a port has an assigned dynamic QoS profile, any manual QoS

configuration changes only take effect after all users have logged off

the port.

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4660-28F

Отзывы:

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 370 / 2020

Результаты поиска

Содержание ECS4660-28F

Отзывы: