manualshive.com logo in svg

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 1941 / 2020

Поделиться
Скачать
Edge-Core ECS4660-28F Скачать руководство пользователя страница 1941

C

HAPTER

 52

  |  Multicast Routing Commands

PIM Multicast Routing

–  1941  –

ip pim rp-address

This command sets a static address for the Rendezvous Point (RP) for a 

particular multicast group. Use the 

no

 form to remove an RP address or an 

RP address for a specific group.

S

YNTAX

 

[

no

]

 ip pim rp-address 

rp-address 

[

group-prefix

 

group-address 

mask

]

rp-address

 - Static IP address of the router that will be an RP for the 

specified multicast group(s).

group-address

 - An IP multicast group address. If a group address 

is not specified, the RP is used for all multicast groups.

mask

 - Subnet mask that is used for the group address. 

D

EFAULT

 S

ETTING

 

None 

C

OMMAND

 M

ODE

 

Global Configuration

C

OMMAND

 U

SAGE

 

◆

The router specified by this command will act as an RP for all multicast 

groups in the local PIM-SM domain if no groups are specified. A static 

RP can either be configured for the whole multicast group range 

224.0.0.0/4, or for specific group ranges. 

◆

Using this command to configure multiple static RPs with the same RP 

address is not allowed. If an IP address is specified that was previously 

used for an RP, then the older entry is replaced. 

◆

Multiple RPs can be defined for different groups or group ranges. If a 

group is matched by more than one entry, the router will use the RP 

associated with the longer group prefix length. If the prefix lengths are 

the same, then the static RP with the highest IP address is chosen. 

◆

Static definitions for RP addresses may be used together with RP 

addresses dynamically learned through the bootstrap router (BSR). If 

an RP address learned by the BSR and one statically configured using 

this command are both available for a group range, the RP address 

learned by the BSR is chosen over the one statically configured with 

this command.

◆

All routers within the same PIM-SM domain must be configured with the 

same RP(s). Selecting an RP through the dynamic election process is 

therefore preferable for most situations. Using the dynamic RP election 

process also allows a backup RP to automatically take over if the active 

RP router becomes unavailable. 

◆

If the 

no

 form of this command is used without specifying a multicast 

group, the default 224.0.0.0 (with the mask 240.0.0.0) is removed. In 

other words, all multicast groups are removed.

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов