Edge-Core ECS4660-28F, Руководство по управлению, Страница: 958 / 2020

C
HAPTER
24
| System Management Commands
Time Range
– 958 –
E
XAMPLE
Console(config)#time-range r&d
Console(config-time-range)#
R
ELATED
C
OMMANDS
Access Control Lists (1163)
absolute
This command sets the time range for the execution of a command. Use
the no form to remove a previously specified time.
S
YNTAX
absolute start hour minute day month year
[ end hour minutes day month year ]
absolute end hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2009-2109)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Time Range Configuration
C
OMMAND
U
SAGE
◆
If a time range is already configured, you must use the no form of this
command to remove the current entry prior to configuring a new time
range.
◆
If both an absolute rule and one or more periodic rules are configured
for the same time range (i.e., named entry), that entry will only take
effect if the current time is within the absolute time range and one of
the periodic time ranges.
E
XAMPLE
This example configures the time for the single occurrence of an event.
Console(config)#time-range r&d
Console(config-time-range)#absolute start 1 1 1 april 2009 end 2 1 1 april
2009
Console(config-time-range)#