Edge-Core ECS4660-28F Скачать руководство пользователя страница 505

Страница: 505 / 2020

HAPTER

| Basic Administration Protocols

Simple Network Management Protocol

– 505 –

The Notification Log MIB (NLM, RFC 3014) provides an infrastructure in

which information from other MIBs may be logged.

◆

Given the service provided by the NLM, individual MIBs can now bear

less responsibility to record transient information associated with an

event against the possibility that the Notification message is lost, and

applications can poll the log to verify that they have not missed any

important Notifications.

◆

If notification logging is not configured, when the switch reboots, some

SNMP traps (such as warm start) cannot be logged.

◆

To avoid this problem, notification logging should be configured as
described in this section, and these commands stored in the startup

configuration file using the System > File (Copy – Running-Config)

page as described on

page 157

. Then when the switch reboots, SNMP

traps (such as warm start) can now be logged.

◆

Based on the default settings used in RFC 3014, a notification log can

contain up to 256 entries, and the entry aging time is 1440 minutes.

Information recorded in a notification log, and the entry aging time can

only be configured using SNMP from a network management station.

◆

When a trap host is created using the Administration > SNMP

(Configure Trap – Add) page described on

page 500

, a default notify

filter will be created.

ARAMETERS

These parameters are displayed:

◆

IP Address

– The Internet address of a remote device. The specified

target host must already have been configured using the

Administration > SNMP (Configure Trap – Add) page.

The notification log is stored locally. It is not sent to a remote device.

This remote host parameter is only required to complete mandatory

fields in the SNMP Notification MIB.

◆

Filter Profile Name

– Notification log profile name. (Range: 1-32

characters)

NTERFACE

To create an SNMP notification log:

Click Administration, SNMP.

Select Configure Notify Filter from the Step list.

Select Add from the Action list.

Fill in the IP address of a configured trap manager and the filter profile
name.

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4660-28F

Отзывы:

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 505 / 2020

Результаты поиска

Содержание ECS4660-28F

Отзывы: