Edge-Core ECS4660-28F Скачать руководство пользователя страница 446

Страница: 446 / 2020

HAPTER

| Security Measures

DHCP Snooping

– 446 –

the DHCP client request, including the port and VLAN ID. This allows

DHCP client-server exchange messages to be forwarded between the

server and client without having to flood them to the entire VLAN.

◆

If DHCP Snooping Information Option 82 is enabled on the switch,

information may be inserted into a DHCP request packet received over

any VLAN (depending on DHCP snooping filtering rules). The

information inserted into the relayed packets includes the circuit-id and

remote-id, as well as the gateway Internet address.

◆

When the switch receives DHCP packets from clients that already

include DHCP Option 82 information, the switch can be configured to

set the action policy for these packets. The switch can either drop the
DHCP packets, keep the existing information, or replace it with the

switch’s relay information.

DHCP S

NOOPING

ONFIGURATION

Use the IP Service > DHCP > Snooping (Configure Global) page to enable

DHCP Snooping globally on the switch, or to configure MAC Address

Verification.

CLI R

EFERENCES

◆

"DHCPv4 Snooping" on page 1115

ARAMETERS

These parameters are displayed:

◆

DHCP Snooping Status –

Enables DHCP snooping globally.

(Default: Disabled)

◆

DHCP Snooping MAC-Address Verification

– Enables or disables

MAC address verification. If the source MAC address in the Ethernet

header of the packet is not same as the client's hardware address in the

DHCP packet, the packet is dropped. (Default: Enabled)

◆

DHCP Snooping Information Option Status

– Enables or disables

DHCP Option 82 information relay. (Default: Disabled)

◆

DHCP Snooping Information Option Sub-option Format

– Enables

or disables use of sub-type and sub-length fields in circuit-ID (CID) and

remote-ID (RID) in Option 82 information.

◆

DHCP Snooping Information Option Remote ID

– Specifies the

MAC address, IP address, or arbitrary identifier of the requesting device

(i.e., the switch in this context).

■

MAC Address

– Inserts a MAC address in the remote ID sub-option

for the DHCP snooping agent (i.e., the MAC address of the switch’s

CPU). This attribute can be encoded in Hexadecimal or ASCII.

■

IP Address

– Inserts an IP address in the remote ID sub-option for

the DHCP snooping agent (i.e., the IP address of the management

interface). This attribute can be encoded in Hexadecimal or ASCII.

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4660-28F

Отзывы:

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 446 / 2020

Результаты поиска

Содержание ECS4660-28F

Отзывы: