Edge-Core ECS4660-28F Скачать руководство пользователя страница 655

Страница: 655 / 2020

HAPTER

| Multicast Filtering

Layer 3 IGMP (Query used with Multicast Routing)

– 655 –

◆

V1 Timer

– The time remaining until the switch assumes that there are

no longer any IGMP Version 1 members on the IP subnet attached to

this interface.

■

If the switch receives an IGMP Version 1 Membership Report, it sets

a timer to note that there are Version 1 hosts present which are

members of the group for which it heard the report.

■

If there are Version 1 hosts present for a particular group, the

switch will ignore any Leave Group messages that it receives for

that group.

Show Details

The following additional information is displayed on this page:

◆

VLAN

– VLAN identifier. The selected entry must be a configured IP

interface. (Range: 1-4094)

◆

Group Address

– IP multicast group address with subscribers directly

attached or downstream from the switch, or a static multicast group

assigned to this interface.

◆

Interface

– The interface on the switch that has received traffic

directed to the multicast group address.

◆

Up Time

– The time elapsed since this entry was created. (Depending

on the elapsed time, information may displayed for w:weeks, d:days,

h:hours, m:minutes, or s:seconds.)

◆

Group Mode

– In INCLUDE mode, reception of packets sent to the

specified multicast address is requested only from those IP source

addresses listed in the source-list parameter. In EXCLUDE mode,

reception of packets sent to the given multicast address is requested

from all IP source addresses, except for those listed in the source-list

parameter and for any other sources where the source timer status has

expired.

◆

Group Source List

– A list of zero or more IP unicast addresses from

which multicast reception is desired or not desired, depending on the

filter mode.

■

Source Address

– The address of one of the multicast servers

transmitting traffic to the specified group.

■

Up Time

– The time elapsed since this entry was created.

(Depending on the elapsed time, information may displayed for

w:weeks, d:days, h:hours, m:minutes, or s:seconds.)

■

V3 Expire

– The time remaining before this entry will be aged out.

The V3 label indicates that the expire time is only provided for

sources learned through IGMP Version 3. (The default is 260

seconds.)

■

Forward

– Indicates whether or not traffic will be forwarded from

the multicast source.

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4660-28F

Отзывы:

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 655 / 2020

Результаты поиска

Содержание ECS4660-28F

Отзывы: