EDELRID Beast Duo (LITE), Руководство пользователя

Страница: 22 / 88

NOTES CONCERNING APPLICATION, SAFETY, SERVICELIFE,
STORAGE AND MAINTENANCE
Safety notes
If this product is combined with other components these may
mutually affect safety. Use only CE marked components of personal
protective equipment (PPE) for protection against falling from a
height.
If original components of the product are altered or removed, this
may impair the safety properties. The equipment should not be
altered or remodelled or adjusted by use of additional parts in any
way not specifically recommended in writing by the manufacturer.
Before and after use, the product must be scrutinized for damage
(e. g. fissures and corrosion); ready for use condition and proper
function must be ensured.
The product must be discarded immediately if even the slightest
doubt concerning its safety in use has come up.
Attention ! The products must not be subjected to damaging
influences. These include contact with aggressive or corrosive
substances (e. g.: acid, lye, soldering water, oils, cleaning
agents) as well as extreme temperatures or sparks.
Sharp edges, moisture and icing especially may substantially
impair the strength of textile products!
Climate during use
The temperature range for continuous use of the product (in dry
conditions) is approx. -30 °C to +40 °C.
Servicelife and replacement
The servicelife of the product mainly depends on the type and
frequency of use as well as on external influences.
Products made of artificial fibres (polyamide or polyester,
Dyneema
® , Aramid) are subject to some aging even if not used;
aging mainly depends on ultraviolet radiation as well as on
climatic conditions.
When the usable period has elapsed or latest at the end
of the maximum service life, the product must be
removed from use.
Maximum servicelife
at optimum storage conditions (see
Storage) if unused: Plastic parts 12 years; Metal parts: unlimited
Infrequent use
Servicelife for infrequent proper use, without detectable wear
and at optimum storage conditions: 10 years
Frequent or extreme use
Upon damage, the PPE product must immediately be removed from
service and must be presented to a skilled person or the
manufacturer for scrutiny or repair. Upon completion, the scrutiny
or repair must be confirmed by the skilled person in writing.
Generally, PPE products must be replaced if webbing edges are
damaged or yarn has been pulled from belts and straps, or if
signs of damage/abrasion are visible on the seams, or if the
product has come in contact with chemicals.
If the points are worn to less than 4/5 (80 %) of the original tip
length, the crampons must be replaced.
Storage, transport and maintenance
Storage:
Continuous storage temperature approx. -10 °C to +30 °C, dry
and protected from daylight
No contact with chemicals (Caution: battery acid!). Store without
mechanical squeezing, pressure or tension.
Transport:
The product must be protected from direct sunlight, chemicals,
contamination and mechanical damage. A protective bag or
special transport and storage container should be used; these
should also be suitable to prevent damage and injury from the
crampon tips.
54510_GAL_CRAMPONS_MS_150226.indd 22 26.02.2015 13:30:02