EcoTouch Configuration Changes
EcoTouch Configuration Changes
Change Channel
1.
On the EcoTouch, “three-finger tap” anywhere on the screen.
2.
The System Status screen appears.
3.
Press the
Config button.
4.
Enter the password C57A
5.
Touch
Enter.
6.
Touch Reconnect
7.
Touch Search
8.
When “
Success
” message appears, press Exit, press Exit on the next screen and Exit on the third
screen.
Unpair EcoTouch
1.
On the EcoTouch, “three-finger tap” anywhere on the screen.
2.
The System Status screen appears.
3.
Touch the
Config button.
4.
Enter the password C57A
5.
Touch
Enter.
6.
Touch
Unpair.
7.
Touch
Delete.
8.
Are you sure you want to delete pairing with EcoSource? Touch
Delete
9.
When the “No longer Paired” message appears, touch
Exit, touch Exit on the next screen and Exit on
the third screen.
Activate “Display Mode” Option
1.
On the EcoTouch, “three-finger tap” anywhere on the screen.
2.
The System Status screen appears.
3.
Press the
Config button.
4.
Enter the password C57A
5.
Touch
Enter
6.
Touch Display/Config
7.
Enable Demo Mode field: touch the pencil icon to select “Y” or “N”
8.
Display Style field: touch the pencil icon to select “Detailed” or “Minimal”
9.
Touch
Exit
FYI, touch the hamburger icon
to toggle between Detailed and Minimal display modes.
System Status Screen
(Displays Firmware Version, MAC, EPID, Channel, Address, LQI and Paired status.)
1.
On the EcoTouch, “three-finger tap” anywhere on the screen.
2.
The System Status screen appears.
3.
Touch
Exit when done.
EcoWave Featur ing EcoTouch IO&M Guide
Telkonet, Inc.
For Use w ith Fir mw ar e Ver sion 2.x
20800 Sw enson Dr ive, Suite 175
Waukesha, WI 53186
Revision 2
(800) 380-9640
Page 32
w w w .telkonet.com