Note:
Ensure all cardboard and packaging used to protect the brick and pizza stones is
removed
before
using. It is both on top
of
and underneath the stones.
Get all of it out when you unpack the oven chamber.
NOTE!! Do not install the stone
s
until after the initial burn to break in the oven. See Page 1
0
No.
Name
Size
QTY
E
Flat Head Screw
M4*10 2PCS
No.
Name
Size
QTY
A
Flat Head Screw-1/2”
Long
M6*15 6PCS
Assembly of the pizza stone to the oven top: The stone is held up by 2 brackets and 6
screws.
To make is easier to assemble the stone we have provided a plastic pipe
“jack” to hold the stone in place while you install the brackets & screws. Center the
plastic adjustable tube under the stone to push the stone up to the oven top.
Loosely start all the screws first. Screw the brackets in place to hold the stone.
5
2
6
ECO-710
10
page
1
2
NOTE!! THIS STEP HA
S
ALREADY BEEN COMPLETED ON YOUR UNIT. SO, MOVE TO THE NEXT
STEP.
Also note that the vent pipe now has a cap on the end to close it when not in use.
DO THIS AFTER THE BREAK-IN BURN (See Pg.
9
& 1
0
)
LET
THE
OVEN
COOL
DOWN
COMPLETELY BEFORE DOING THIS!
The bricks and the bottom stone
need to be put in place with a little
piece of cardboard on top to
properly use the jack. That will allow
you to hold the top stone tight
against the oven roof.
