Console Software
29
Console Software
The AudioFire 8 Console Window on Vista: Analog Out 3-4 Tab selected.
Note that since the Analog 3-4 tab is selected you are no longer looking at the input
monitor and output controls for analog outputs 1 and 2. You are now looking at the
controls for analog outputs 3 and 4. However, you can still see the input signal on
the input level meters for Analog input 1-2.
At the top of each input channel, below the channel number, is a green label field
that can be changed by clicking in it and typing. Below the label is the nominal
level setting for that input channel. The labels, nominal levels, level meters and
gang settings are the only things in this section that do not change when different
output bus tabs are selected.
