Installation
11
Installation
Installation
Complete installation consists of logging in as an administrator, installing the
Windows drivers into your system, connecting the audio interface to a FireWire
port and then connecting your AudioFire to any other peripheral audio equipment.
Log In as Administrator
To install your Echo product you must be logged into your computer as an
Administrator. You can either log in with the account called “Administrator” or
with any other account that has administrative privileges. Otherwise, you will not
be able to install the hardware and drivers.
Important — Check the Echo Website for Software Updates
You should always check our website (
www.echoaudio.com
) for the latest driver
updates before installing your AudioFire product. Just go to the driver downloads
area and find the AudioFire section. If there is a new driver then you should use it
instead of the one on the AudioFire CDROM. Just compare the version number to
the version shown on the AudioFire CDROM installation screen to be sure. You
should also check the website periodically in the future in case new drivers are
released at a later date.