English
English
21
•
The dishes are put in incorrectly.
•
The spray arms collide with the dishes.
Leftover food remains on the dishes
•
The dishes are put incorrectly into the dishwasher, the water did not reach these specific places.
•
The basket is overfilled.
•
The dishes are tilted.
•
The amount of detergent was small.
•
An incorrect program was chosen, rather weak.
•
The dishes are tilted.
•
The spray arms nozzles are clogged with food remains.
•
Filters are clogged.
There are white stains on the dishes
•
The amount of detergent was insufficient.
•
The rinse aid dosage setting was set to a very low level.
•
Despite the high degree of water hardness the special salt in the softener was not used.
•
The water softener is set to an insufficient level.
•
The lid of the salt dispenser is not closed properly.
The dishes are not dry
•
You selected a program without drying.
•
The rinse aid dispenser is set to an insufficient level.
•
The dishes were removed too fast.
There are rust stains on the dishes.
•
Low quality of the stainless steel dishes.
•
High salt content in the water.
•
The lid of the salt dispenser is not closed properly.
•
When filling the salt dispenser, the dishes and the interior of the dishwasher became contaminated.
•
Improper grounding.
If the problem persists after performing the recommended measures, or other defects occur, contact an
authorized service center.
TECHNICAL SPECIFICATIONS
EDF 6023 WE
Number of dish sets
12
Height (cm)
85
Width (cm)
60
Depth incl. connection (cm)
60
Power input
220–240 Vac / 50 Hz
Rated voltage/frequency
1900 W
Water pressure (hydrodynamic pressure)
0.03, MPA (0.3 bar) – 1, MPA (10 bar)
Voltage
10 A
DISPOSAL
Remove properly all the packaging material from the dishwasher.
All packaging material can be recycled.
Plastic parts are marked with standard international abbreviations:
