EBS CPX200N, Инструкция по установке и программированию, Страница: 37 / 106

CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL 37 / 106
Getting the phone number
Command syntax XXXX GETTELNUM=ID
Command description XXXX – user code
ID – index of phone number on the list, possible
values: 1 to 10
Example: 1234 GETTELNUM=2
Feedback message GETTELNUM=ID,NUMBER
or
GETTELNUM:ERROR
Feedback message
description GETTELNUM=ID,NUMBER – information about phone
number
GETTELNUM:ERROR – command rejected by the
system
Setting the content of text message
Command syntax XXXX SETMESSAGE=ID,MESSAGE
Command description Setting the content of text message under the
pointed index
XXXX – user code
ID – index of text, possible values: 1 to 32
MESSAGE – content of the text message
Example: 1234 SETMESSAGE=4,Robbery
Feedback message SETMESSAGE:OK or SETMESSAGE:ERROR
Feedback message
description SETMESSAGE:OK – command accepted
SETMESSAGE:ERROR – command rejected by the
system