CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
66 / 106
8.6.
MONITORING
That option allows determining which of available signals generated by the equipment will
be transmitted to the monitoring station.
NOTE: The “Configuration change” event refers to configuration
change via SMS or via GPRS instructions only.
8.6.1.
Events
8.6.1.1.
GPRS ON/OFF
In these columns you can check which signals are to be reported to the monitoring
station via GPRS transmission. You have the option to send information on both,
alarms (change of zone state from idle into active) and returns of zones states from
active into idle (normalisation). In order to transmit a particular signal you have to
check it (by clicking a relevant check box on the right hand side).
Press [Clear] button to remove all checked signals.
Press [Reverse] to reverse the check into the opposite ones.
8.6.1.2.
SMS ON/OFF
In these columns you can check which signals are to be reported to the monitoring
station via SMS message – when the equipment is not connected with server via
