62
Typ EP 501
Start-Up
21.1.
INPUT
- Setting the input signal
This setting is used to select the input signal for the set-point value.
Procedure:
Key
Action
Description
MENU
Press
for approx. 3 s
Switching from process level
setting level.
/
Select
INPUT
ENTER
Press
The possible input signals for
INPUT
are displayed.
/
Select input signal
(4-20 mA, 0-20 mA,....)
SELEC
Press
The selected input signal is now marked by a filled circle .
EXIT
Press
Return to the main menu (MAIN).
EXIT
Press
Switching from setting level
process level.
Table 25:
Setting the input signal
Operating structure:
INPUT
4-20 mA
0-20 mA
0-10 V
0-5 V
Select the input signal
EXIT
ENTER
SELEC
X.TUNE
Press for approx. 3 s
Process.level
(values are displayed)
MENU
Setting.level
ADD.FUNCTION
EXIT
Figure 23:
Operating structure INPUT
english
