140
Typ EP 501
Auxiliary functions
SERVICE.TIME
–.Operating-hours.counter
The operating-hours counter records the time during which the device was switched on.
If the duty cycle reaches the specified time limit, a message is generated.
• To do this, a history entry is made in the
HISTORY
submenu. For description see “24.2.22.7. History entries in
• The status signal, which is assigned to the message, is indicated at short intervals on the display.
See also
D.MSG
and
CONFIG.MSG
in Chapter “24.2.22.5”, page 133.
Display.
SERVICE.TIME
Description.of.the.functions
EXIT
INPUT
29-5-1
SERVICE.TIME
LIMIT
HISTORY
NEXT.M
89d.
23h
90d.
00h
The interval for messages preset at the factory for 90 days can be
changed in the
LIMIT
submenu.
After
NEXT.M
the remaining time is displayed until the next message
appears.
The history entries of the last 3 messages can be viewed and deleted in
the
HISTORY
submenu.
Table 75:
SERVICE.TIME; operating-hours counter
Operating structure:
ENTER
INPUT
ENTER
OK
ESC
EXIT
CLEAR
Input interval
History entry
is displayed
Display the remaining time until the next message
SERVICE.TIME
LIMIT
NEXT M.
HISTORY
Delete.history.entry
EXIT
Figure 83:
Operating structure SERVICE.TIME
Specifying.interval.for.the.output.of.messages
Key
Action
Description
/
Select
SERVICE.TIME
(To do this, the
SERVICE.TIME
function must be incorporated into
the
DIAGNOSE
main menu. See Chapter “24.2.22.4. Activation of
ENTER
Press
The menu is displayed.
/
Select
LIMIT
INPUT
Press
The preset value is displayed.
/
Increase value
<
Change the
(time unit: d/h/m)
Set interval for outputting the message.
OK
Press
Return to the
SERVICE.TIME
menu.
EXIT
Press
Return to the
DIAGNOSE
main menu.
Table 76:
SERVICE.TIME; specifying interval.
english
