35
Typ EP 501
Installation
Anti-twist.safeguard:
Note.the.flat.side.of.the.shaft!..
One of the setscrews must be situated on the flat side of the shaft as an anti-twist safeguard
(see “Figure 13”).
Rotation.range.of.the.position.sensor:.
The maximum rotation range of the position sensor is 180°.
The shaft of the device may be moved within this range only.
90°
Ideal position
for the swing range
of the flattened shaft
(min. 30 ° / max. 180 °)
.
The swing movement of the
flattened shaft must be within the
position sensor rotation range of
180°.
Flattened shaft
180°
Maximum
swing range
Figure 13:
Rotation range / anti-twist safeguard
→
Assemble the multi-part assembly bridge
*
suitable for the actuator.
→
Attach the assembly bridge to the device using 4 cheese-head screws
③
and circlips
④
(see “Figure 14”).
③
④
*
The assembly bridge consists of
4 parts which can be adjusted
to the actuator by varying the
arrangement.
Figure 14:
Attach assembly bridge (schematic representation)
