Eaton XMCSPAN-001, Инструкция по установке и эксплуатации

Страница: 16 / 48

This chapter gives an overview of the features of the XMCspan, lists the standard compliances, and details the
ordering information for the board.
FEATURES OF THE XMCSPAN
The XMCspan is a carrier module that provides PCI Express expansion capability to the VME base board.
The XMCspan has the following features:
• Provides access to XMC/PMC I/O through the front panel or rear transition module
• Provides stacking capability for up to two XMCspan modules
• Compatibility with the MVME7100 board
• Support for two single-wide XMC/PMC/PrPMC modules, or one double-width XMC/PMC/PrPMC module
• +3.3 V PCI signaling voltage (VIO)
• PEX8533 PCI Express switch with the following features:
• Six highly flexible and configurable PCI Express ports
• 32 full duplex PCI Express lanes with integrated SerDes
• 2.5 Gbps bandwidth per lane
• Fully non-blocking switch architecture
• Signal support for INTA and FATAL ERROR
• Support for QoS (Quality of Service)
• Support for port performance monitoring
• Tsi384 PCI Express-to-PCI/PCI-X bridge with the following features:
• Four full duplex PCI Express lanes with integrated SerDes
• 2.5 Gbps bandwidth per lane
• Conventional PCI data rates: 33 and 66 MHz
• PCI-X data rates: 50, 66, 100, and 133 MHz
STANDARD COMPLIANCES
This product meets the following standards:
Description Standard
Safety requirements UL 60950-1
UL 94V-011
EN 60950-1
16
| XMCspan Installation and Use | 6806800H03A
Introduction