Eaton XMCSPAN-001, Инструкция по установке и эксплуатации

Страница: 29 / 48

Reset Sources
There are many ways to reset the XMCspan. The following sources will generate a board-level hardware reset
for the whole XMCspan, including the PEX8533 and other devices connected to one of the PCI/PCI-X buses:
• Power-up reset
This reset occurs when the XMCspan is powered on.
• VME hardware reset
The VME base board has a single push button switch that provides abort and reset functions. When the
switch is pressed for more than 3 seconds, a board-level hardware reset is generated.
• VMEbus reset
When the VME base board receives a VMEbus reset, it combines this signal with any local reset signal. This
resets all devices on the base board, including the XMCspan.
Reset Switch
The standard reset/abort switch has been ommitted on the XMCspan.
Reset Controller
The on-board CPLD is used to handle power-up and reset. The LC4128V-27TN100C from Lattice, which is a
100-pin TSSOP package, is used.
6806800H03A | XMCspan Installation and Use |
29
Resetting the XMCspan