Eaton SC200, Руководство по эксплуатации

Страница: 101 / 139

Communications
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H November 2011
93
DCTools Communications Setup
► To connect to the SC200 with DCTools:
1
If not already installed, install the PC modem (hardware and software) according to the
manufacturer's instructions.
2
Install DCTools on the PC/laptop.
3
Double-click the DCTools icon to open the Connection Manager window.
4
Go to Connection > New to open a new connection dialog box.
5
Enter:
Connection Name: <as required>
Comms Enabled: True
Protocol: S3P
Connect Using: Select the COM port used by the modem (if external) or the
modem name.
S3P Address: 0 ( 0 = Broadcast, 1-65279 = individual address )
Phone Number: The number of the PSTN line used by the modem.
Modem Logon: Clear if a logon script is not required for the modem.
Select if a logon script is required. Click
Logon Script to define.
For more details, see DCTools online help (press F1).
6
Press OK. DCTools will now connect to the SC200.
7
See System Operation on page 21 for details of the SC200 control and monitoring functions
available via DCTools .

For help using DCTools press F1.
8
If required, access to the SC200 via DCTools can be password controlled. See Write Access
Password on page 95 .
SMS Text Messaging Setup (if required)

For additional information see Application Note AN0112. To receive application notes see
Worldwide Support on page
125 .
► To enable SMS alarm messages
1
Connect to the SC200 with DCTools/Web.
2
Go to Configuration > Communications > Serial .
3
Click on

to expand SMS Notifications .
4
For each cellphone to receive SMS alarm messages set the Phone Number and other details
as required.
5
Type the required Prefix string if alarm messages are to be sent to an email address.

This requires a GSM-Email Gateway connected to the GSM network. Contact the GSM
network operator for details of the Prefix string required at the beginning of the SMS message.

Emails can also be sent via an IP network. See details on page 87 .