25
LCD touchscreen display programming
PRC-E Series Instruction Manual
MN014003EN August 2015 www.eaton.com
Each panelboard status can be viewed by navigating to the
individual “Breakers” screen for particular panelboard. This
is done by tapping the panelboard button to display the
“Breakers” screen. Tap the “Back” button to return to the
“Breakers / Select Panelboard” screen.
otee:
N
The yellow “Override” LED on the PRC-E controller
will illuminate indicating an override is active.
Override ALL OFF
otee:
N
An “Override All OFF” button will turn “OFF” all
controllable circuit breakers in all panelboards
connected to the controller. If there are controllable
circuit breakers that must be left “ON” or in-service
for any reason, an individual controllable circuit
breaker override should be done instead of a global
panelboards override.
Tap “Override ALL OFF” button to override “OFF” all the
controllable circuit breakers in all panelboards connected to
the controller.
You can visibly verify that all controllable circuit breaker
handles are in the “OFF” position.
Each panelboard status can be viewed by navigating to the
individual “Breakers” screen for particular panelboard. This
is done by tapping the panelboard button to display the
“Breakers” screen. Then, tap the “Back” button to return to
the “Breakers / Select Panelboard” screen.
otee:
N
The yellow “Override” LED on the PRC-E controller
will illuminate indicating an override is active.
Clear “Override All”
otee:
N
All of the controllable circuit breakers in all the
connected panelboards will return to their last
commanded normal in-service state which may be
the “ON” or “OFF” position. If there are controllable
circuit breakers that must be left in override for any
reason, an individual controllable circuit breaker
clear override should be done instead of a global
panelboards clear override.
Tap “Clear All Overrides” button to clear override for all the
controllable circuit breakers in all panelboards connected to
the controller and return them to normal in-service state.
otee:
N
The yellow “Override” LED on the PRC-E controller
will turn off.
Overriding an individual circuit breaker
From the “Main Menu” screen; tap the “Breakers” button.
This will display the “Breakers / Select Panelboard” screen.
Tap the desired panelboard button.
This will display the “Breakers” screen for the selected
panelboard.
Tap the controllable circuit breaker number to be overridden.