29
LCD touchscreen display programming
PRC-E Series Instruction Manual
MN014003EN August 2015 www.eaton.com
This will display the numeric keypad.
Tap the numbers to input the hour value.
Tap the “Enter” button to accept the entry.
To set minutes, tap the minute entry field.
This will display the numeric keypad.
Tap numbers to input the minutes value.
Tap the am/pm dropdown and choose the correct time of day.
Tap the “Enter” button to accept the entry.
otee:
N
Notice that the “Save” button in the top right corner
of the “Date/Time Location Configuration” screen did
turn red, indicating that there are some changes to
the configuration in this screen. The changes were
accepted, but not yet saved in the controller until the
red “Save” button is tapped.
Setting Daylight Savings Time (DST)
To Enable DST, tap the Enable DST box to add a checkmark,
if one is not already entered.
To use the North American Standard, tap the radio button
for this selection. The Daylight Savings dates for the North
American Standard are automatically calculated, and no
customer entry is required. This is most used selection, and
it does not require user to come back to this screen year
after year to reset the dates.
If user requires manual date entry, tap the “Manual Dates”
radio button.
Tap the “Spring” date entry field,
This will display the calendar screen tool.
Choose the date for the Spring DST change. See the above
details on how to use the calendar.
Tap the “Fall” date entry field.
This will display the calendar screen tool.
Choose the date for the Fall DST change. See the above
details on how to use the calendar.
otee:
N
When manual dates are entered, it will be required
that a user edits the date any time it changes for a
particular year.
otee:
N
Notice that the “Save” button in the top right corner
of the “Date/Time Location Configuration” screen did
turn red, indicating that there are some changes to
the configuration in this screen. The changes were
accepted, but not yet saved in the controller until the
red “Save” button is tapped.
Once all the Date/Time | DST configuration edits are
complete, tap the red “Save” button to save the changes.
To leave the page without saving changes, just tap the
“Back” button.
Setting the location
The location coordinates are used to automatically calculate
the Sunrise and Sunset times for a given area.
Tap the Location tab in the “Date/Time Location
Configuration” screen.
This will display the tab for Location entry.