Eaton PowerXL DF1 Series, Руководство пользователя

Страница: 58 / 284

58
5. Parameter Description
Eaton Electric General Inverters DF1 Series UMXXXXXXXXE February 2020 www.eaton.com
Group No. Name Group No. Name
06-46 P.742 E3 06-64 P.760 E1 alarm (days/hours)
06-47 P.743 E4 06-65 P.761 E1 alarm (minutes/seconds)
06-48 P.744 E5 06-70 P.766 E2 alarm output frequency
06-49 P.745 E6 06-71 P.767 E2 alarm output current
06-50 P.746 E7 06-72 P.768 E2 alarm output voltage
06-51 P.747 E8
06-73 P.769
E2 alarm the temperature rising accumula-
tion rate
06-52 P.748 E9
06-53 P.749 E10 06-74 P.770 E2 alarm PN voltage
06-54 P.750 E11 06-75 P.771 E2 alarm the time of inverter has run
06-55 P.751 E12 06-76 P.772 E2 alarm inverter operation status code
06-56 P.752 E1 alarm output frequency 06-77 P.773 E2 alarm (years/months)
06-57 P.753 E1 alarm output current 06-78 P.774 E2 alarm (days/hours)
06-58 P.754 E1 alarm output voltage 06-79 P.775 E2 alarm (minutes/seconds)
06-59 P.755
E1 alarm the temperature rising
accumulation rate
07-17 P.802 CAN open communication status
07-18 P.803 CAN open control status
06-60 P.756 E1 alarm PN voltage 09-13 P.124 Expansion card version
06-61 P.757 E1 alarm the time of inverter has run 14-20 P.618 Current value of curling radius
06-62 P.758 E1 alarm inverter operation status code 14-32 P.630 Actual line speed
06-63 P.759 E1 alarm(years/months)
Password protection
• Registering a password
1. Write a number (2~65535) in 00-05as a password, password protection takes effect immediately;
2. After registering a password,00-05=1;
• Unlocking password protection
1. Write the correct password in 00-04, and then password protection will be unlocked;
2. After unlocking the password, 00-04=0, 00-05=1;
3. If turn the inverter power off and then turn on, it will still restore to the password protection status.
• Password all clear
1. Write the correct password in 00-04 to unlock the password protection;
2. Write 0 in 00-05, password will be all cleared.
ote: N Please keep the password properly. Bring the inverter to the factory for decryption if the password is forgotten.
5.1.4 Monitoring function
• The item to be displayed on the parameter unitcan beselected.
Parameter Name
Factory
Value
Setting Range Content
00-06
P.11
0
Parameter unit monitoring
selection
1
X0
When the inverter starts, the parameter unit enters the
monitoring mode automatically, and the screen displays
the output frequency.
X1
When the inverter starts, the screen of the parameter
unit displays the target frequency.