Eaton PowerXL DF1 Series, Руководство пользователя

Страница: 196 / 284

196
5. Parameter Description
Eaton Electric General Inverters DF1 Series UMXXXXXXXXE February 2020 www.eaton.com
5.10 PG feedback parameter group 09
Group
Parameter
Number
Name Setting Range
Factory
Value
User
settings
09-00 P.349 PG type selection
0: ABZ
0
1: ABZ (Synchronous motor decicated)
2: Resolver 1x Synchronous motor standard encoder
3: ABZ/UVW Synchronous motor standard encoder
09-01 P.350 Number 1 of the encoder pulses 0~20000 1024
09-02 P.351 Encoder input mode setup 1
0: No function
0
1: Phase A/B pulse train, Phase A is 90° ahead of Phase B
and is forward rotation.
2: Phase A/B pulse train, Phase B is 90° ahead of Phase A
and is forward rotation.
3: Phase A is a pulse train. Phase B is a direction sign. L is
reverse rotation and H is forward rotation.
4: Phase A is a pulse train. Phase B is a direction sign. L is
forward rotation and H is reverse rotation.
09-03 P.352 PG abnormality detection time 0~100.0s 1.0s
09-04 P.353 Over-speed detection frequency 0~30.00Hz 4.00Hz
09-05 P.354 Over-speed detection time 0~100.0s 1.0s
09-06 P.355 Number 2 of the encoder pulses 0~20000 2500
09-07 P.356 Encoder input mode 2
0:No function
0
1: Phase A/B pulse train, Phase A is 90° ahead of Phase B
and is forward rotation.
2:Phase A/B pulse train, Phase B is 90° ahead of Phase A
and is forward rotation.
3: Phase A is a pulse train. Phase B is a direction sign. L is
reverse rotation and H is forward rotation.
4: Phase A is a pulse train. Phase B is a direction sign. L is
forward rotation and H is reverse rotation.
09-08 P.357 Dividing frequency output setting 1~255 1
09-09 P.358 Dividing frequency filter coefficient 0~255 0
09-10 P.359 Electronic gear ratio 0~300.00 1.00
09-11 P.360
Prevent reverse rotation detection
pulse number
0~65535 0
09-12 P.361 Rse reverotation detection number 0~65535 0
09-13 P.124 Expansion card version Read Read
09-14 P.363 Phase Z adjust margin
0.0°Do not adjust
15.0°
0.1°~360.0°: Phase Z impulse adjust
09-15 P.364 Phase Z DV1/DV2 alarm-enabled
0: Phase Z DV1/DV2 alarm is not valid
1
1: Phase Z DV1/DV2 alarm is valid
09-16 P.386
DXF-ENC-302 Hardware break line
detection
0: Break line detection is invalid
1
1: Break line detection is effective