Eaton PowerXL DF1 Series, Руководство пользователя, Страница: 107 / 284

107
5. Parameter Description
Eaton Electric General Inverters DF1 Series UMXXXXXXXXE February 2020 www.eaton.com
5.4 Digital input/ output parameter group 03
Group
Parameter
Number
Name Setting Range
Factory
Value
User
settings
03-00 P.83 DI1 function selection
0: STF (the inverter runs forward)
0
1: STR (the inverter runs reverse)
2: RL (Multi-speed low speed)
3: RM (Multi-speed medium speed)
4: RH (multi-speed high speed)
5:AU ( Analog terminal AI3 priority)
6: The external thermal relay operation
7: MRS (the instantaneous stopping of the inverter output)
8: RT (the inverter second function)
9: EXT (external JOG)
10: STF+EXJ
11: STR+EXJ
12: STF+RT
13: STR+RT
14: STF+RL
15: STR+RL
16: STF+RM
17: STR+RM
18: STF+RH
19: STR+RH
20: STF+RL+RM
21: STR+RL+RM
22: STF+RT+RL
23: STR+RT+RL
24: STF+RT+RM
25: STR+RT+RM
26: STF+RT+RL+RM
27: STR+RT+RL+RM
28: RUN (the inverter runs forward)
29: STF/STR (it is used with RUN, when STF/ STR is”on”,
the inverter runs reverse; when STF/STR is “off”, the
inverter runs forward)
30: RES (external reset function)
31: STOP (it can be used as a three-wire mode with the RUN
signal or the STF-STR terminal)
32: REX (multi-speed set (16 levels))
33: PO (in “external mode”, programmed operation mode is
chosen)
34: RES_E (external reset become valid only when the alarm
goes off.)