Eaton MVX9000 Series, Руководство пользователя

Страница: 114 / 180

Group 90 — Communications
5-66 MVX9000 User Manual
Descriptions of
Parameter Settings
Table 5-3: Communication Mapping Table (Continued)
Modbus Groups Description Range
0709H 90.10 Status monitor for AC drive
(Bit 0-1) 00 Stop
01: Decelerate upon stop
command
10: Drive is standing by
11: Run
(Bit 2) 1: JOG
(Bit 3-4) 00: FWD
01: REV to FWD
10: FWD to REV
11: REV
(Bit 5-7) Reserved
(Bit 8) 1: Source of frequency by
communication
(Bit 9) 1: Source of frequency by Analog
Input
(Bit 10) 1: Source of operation by
communication
(Bit 11) 1: Parameters have been locked
(Bit 12-15) Reserved
070AH 90.11 Status of Communication
frequency 0.0 to 400.0 Hz
070BH 90.12 Status of output frequency 0.0 to 400.0 Hz
070CH 90.13 Status of output current 0.0 to Max Amps
070DH 90.14 Status of user defined display
(High word) 00 to 65535
070EH 90.15 Status of user defined display
(Low word) 0.00 to 65535
070FH 90.16 Status of output voltage 0.0 to Max V AC
0710H 90.17 Status of drive temperature 0.0 to Max degree C
0711H 90.18 Status of DC bus voltage 0.0 to Max V DC
0712H 90.19 Status of multi-step 0 to Max step
0713H 90.20 Status of PLC time 00 to 65535
0714H 90.21 Status of counter 00 to 65535
0715H 90.22 Status of feedback signal 0.0 to 400.0 Hz
0716H 90.23 Status of PID Setpoint 0.0 to 400.0 Hz