![background image](http://html1.mh-extra.com/html/eaton/mvx9000-series/mvx9000-series_user-manual_3986462053.webp)
Group 20 — Basic Grouping (Quick Start)
MVX9000 User Manual
5-5
Descriptions of
Parameter Settings
Group 20 — Basic Grouping (Quick Start)
20.01
Motor Nameplate
Frequency
Range: 10.0 to 400.0 Hz
Default: 60.0
Unit: 0.1 Hz
This value should be set according to the rated frequency of
the motor as indicated on the motor nameplate. Motor
Nameplate Frequency determines the volts/hertz ratio.
For example: if the drive is rated for 460V AC output and the
Motor Nameplate Frequency is set to 60 Hz, the drive will
maintain a constant ratio of 7.66 v/Hz.
The setting value must
equal to or greater than the Mid-Point Frequency (50.07).
20.02
Range: 115V series 0.1 to 255V
Default: 230.0
Motor Nameplate
Voltage
Range: 230V series 0.1 to 255V
Default: 230.0
Range: 460V series 0.1 to 510V
Default: 460.0
Range: 575V series 0.1 to 637V
Default: 575.0
This parameter determines the Motor Nameplate Voltage of
the AC drive. The Motor Nameplate Voltage setting must be
smaller than or equal to the rated voltage of the motor as
indicated on the motor nameplate.
The setting value must
equal to or greater than the Mid-Point Voltage (50.08).
20.03
Source of Master
Frequency
Range:
Default: 01
00 Master Frequency determined by digital keypad on the drive.
01 Master Frequency determined by keypad potentiometer.
02 Master Frequency determined by 0 – 10V on terminal AI1.
03 Master Frequency determined by 4 – 20 mA on terminal AI2.
04 Master Frequency determined by RS-485.
20.04
Source of Operation
Command
Range:
Default: 01
00 Operating commands determined by the Digital Keypad.
01 Operating commands determined by the External Control
Terminals. Keypad STOP key is enabled.
02 Operating commands determined by the External Control
Terminals. Keypad STOP key is not enabled.
03 Operating commands determined by the RS-485
communication interface. Keypad STOP key is enabled.
04 Operating commands determined by the RS-485
communication interface. Keypad STOP key is not enabled.
Содержание MVX9000 Series
