Operating instructions ResistTel IP4/IP162
03/22
27
-------------- Dialling ---------------
Manual dialling. Enter the subscriber number using the keypad keys. In this operating mode
you can enter digits and text characters and correct the entry if necessary. Finally, switch to
the desired conversation mode (e.g. handset mode ) or press the right arrow key to start
the dialing process.
4.3.4.1.2 Manual input in dial preparation mode
Page 29
4.3.4.2 Use contacts (telephone book)
Page 30
4.3.4.3 Use the dial preparation context menu
Page 31
or
callback. The list of incoming calls opens, from which you can use the and keys to
select the caller you want to call or call back. Finally, switch to the desired conversation mode
(e.g. handset mode ) or press the right arrow key to start the dialing process.
or
redial. The list of outgoing calls opens, from which you can use the and keys to select
the caller you want to call again. Finally, switch to the desired conversation mode (e.g. handset
mode ) or press the right arrow keys to start the dialing process.
----------- Conversation -----------
Decrease conversation volume
Increase conversation volume
Turn microphone mute on/off. The mute switched on is indicated in the display at the bottom
left by the flashing microphone icon .
Perform consultation call. Hold the connection to your current call partner A and call a call
partner B to talk to him without the call partner A being able to overhear. When the query is
initiated , conversation partner A is on hold, the telephone asks you to enter the subscriber
number for conversation partner B and establishes the connection to him after the entry has
been made.
4.3.3.1 Consultation/Toggle calls
/Conference
Page 28
Perform mediation. Connect your current conversation partner A with a conversation partner
B and you end the call yourself. When initiating the transfer , the telephone asks you to enter
the subscriber number for call partner B and establishes the connection to him after you con-
firm the entry by pressing the right arrow key .
Xyz During your call with partner A, another caller reaches you. Acoustically signaled as a call
waiting tone and displayed as a waiting call, you have the following options for dealing with
the waiting caller.
They reject the caller, who then hears the busy signal.
You switch to the caller and put caller A on hold, who cannot overhear your conver-
sation with the caller (caller B). The further procedure corresponds to that of the
query, whereby the dialling is omitted.
4.3.3.1 Consultation/Toggle calls
/Conference
Page 28
