Operating instructions ResistTel IP4/IP162
03/22
31
T
D2A
=
2,0
s
If you miss T
D2A
and en-
ter a digit, perform one
of the corrections i) or ii)
alongside.
If you do not know the name of the party you want to call, briefly press the key to display all the
parties in your contacts (telephone book). However, this method only works when the device is idle. On
the other hand, if the set is in immediate dialing mode, characterized by the prompt "Please dial", press
any digit key for at least T
D2A
= 2.0 s, delete the letter using the key and then press the key .
Finally, press the key to start dialling.
4.3.4.3
Use the dial preparation context menu
Indirect dialing
context menu contains various options on how to proceed with a previously entered
subscriber number. Among other things, you can choose to send a text message, control the number
transmission or set up call forwarding. Press the menu key to open the context menu, which will
show you all the options available for selection. Use the vertical arrow keys , to select the desired
option and then press the key to apply it to the subscriber number.
Below is a description of the options available
Send message
.............. Opens the
message
dialog, inserts the entered subscriber number into the "
For:
"
input field of the dialog and awaits your input of the text message that will be
sent to the subscriber when you finally press the key .
Dial – Show own no
.... Executes the dialling of the entered subscriber number and thereby transmits
your telephone number to the subscriber, who can see your telephone number.
Dial – Hide own no
... Executes the dialing of the entered subscriber number and suppresses the trans-
mission of your telephone number to the subscriber who your call number can
therefore not be seen.
Dial – No diversion
.. Executes the dialling of the prepared subscriber number without carrying out
any call diversions. (If the PBX supports this feature)
Call as user
1)
........... Opens the
call as user
selection menu, which shows all registered users of
the device. Use the vertical arrow keys to select the user who is to be
presented as the caller to the subscriber and then press the key to start the
call.
Divert to - Always
2)
. Opens the
call diversion
dialog, sets the selection parameter
Always
to
On
and enters the entered subscriber number as a redirect destination in the name-
less input parameter below
Always
. Finally, press the key to activate call
forwarding.