Operating instructions ResistTel IP4/IP162
03/22
19
3.1.1.2
Setting Selection Parameters
Selection elements are configuration parameters for which a 1 from N selection must be made. Behind
the left-aligned parameter name and its trailing colon, the currently selected setting value is displayed
right-aligned. The N named setting values form a list that can be inspected in the selected configuration
parameter by the keys and/or in both directions to find the desired setting.
--------- Make a selection ---------
Select the next value from the drop-down list.
Select the previous value from the drop-down list.
3.1.1.3
Setting Input Parameters
Input elements are configuration parameters in which a numeric or textual value must be entered. After
the left-aligned parameter name and its trailing colon, the input field is connected, which is marked by
a blinking cursor | when it is selected. In the lower, right corner of the display, a small, inverse box
indicates whether the input is in digit mode
1
or in text mode
a
|
A
. In text mode, each number key is
assigned a character list, the individual characters of which are inserted one after the other into the
current insertion position when you press the key in quick succession. Wait until the cursor changes
from the left to the right side of the last character used "|c" > "c|" to finally adopt the character. The
mode switches to number mode when your character selection ends on a number sign or you press one
of the keys or . To switch to text mode, hold a number key, e.g. the key , pressed down until
the first character "|a" of the associated character list is output.
----------- Make entries -----------
Input of numeric and text characters.
Move the cursor one character to the left.
Move the cursor one character to the right.
Delete characters before the cursor.
