Operating instructions ResistTel IP4/IP162
03/22
12
2.3
Connections
2.3.1
Connection versions
2.3.1.1
LAN ports and RJ45 socket
The phone has 2 internal LAN connections, each with a cable gland (4) - (KLE). For connection, a LAN
cable must be pulled through the gland (KLE). Inside the phone, the supplied LAN socket must be
pressed onto the cable. By means of the small LAN connection cable located in the device, the connec-
tion to the electronic module can be made via RJ45 socket X500 or X501 (see Figure 5 on page 11).
The LAN feeder can have PoE (Power over Ethernet). Alternatively, the phone can be powered exter-
nally.
All unused cable feedthroughs must be fitted with blind plugs.
Pin/Wire T568A
Pair
T568B
Pair
Signal
ID
Vein T568A Color
T568B Color
Pin assignment RJ45 con-
nector
1
3
2
DA+ Earth
white/green
white/orange
2
3
2
DA-
Minus
green
orange
3
2
3
DB+ Earth
white/orange
white/green
4
1
1
DC+ Minus
blue
blue
5
1
1
DC
Earth
white/blue
white/blue
6
2
3
DB-
Minus
orange
green
7
4
4
DD+ Earth
white/brown
white/brown
8
4
4
DD-
Minus
brown
brown
Figure
6
- RJ45 Connector PinOut
2.3.1.2
Terminal blocks X100, X700, X702 & X703 connectors
The terminal blocks are terminal blocks in the connection compartment of the telephone and in push-in
connection technology. Rigid connection wires or flexible connection wires equipped with wire end
sleeves are only to be inserted into the conductor shaft of the terminals. The contact spring opens
automatically and provides the necessary contact force against the conductor. To uninstall or install
very small connecting wires, use a slotted screwdriver to open the contact spring.
Connection capacity:
0.2 mm
2
≤
A
LtgStarr
≤ 4.0 mm
2
Stripping length:
l
Isol
= 10 mm
