Operating instructions ResistTel IP4/IP162
03/22
21
3.3
Headset Control
By default, the connected headset is controlled by the Shift Speaker button sequence, which activates
and disables the headset conversation mode, as shown in the figure below. However, the prerequisite
for this is that the headset operation in the main menu is switched on or released, which is indicated by
the display of the pictogram in the lower display line, to the right of the date/time display.
Idle mode
Conversation mode headset
Extended control
The release control of the headset operation is carried out via the selection element
Main menu\Phone
settings\Headset:
in the main menu, which can be switched on or off there and set to "
On
" to release
the headset operation.
In addition to the key sequence Shift Speaker, one of the inputs Input1 – Input3 can be used to extend
the headset control so that the pressed button, which is connected to the selected input, causes the
activation/deactivation of the headset operation. To do this, select one of the DropDown lists
Input1
–
Input3
in the web interface
WebIp162\Device\Keypad
and select the working method "
Headset, press
"
to use the input for the extended headset control.
3.4
Headset Audio Features
Tab
WebIp162\Device\Audio\
of the web interface contains the drop-down list
Headset Type
and two
CheckBoxes
Headset Ringing
&
Headset Ringing only
, which are used to set the audio properties of
the headset operation. In the drop-down list, select the type of connected headset that is factory set to
Imtradex/Ecom Instruments
. The ringing signal can be directed to the headset via the two CheckBoxes
switched off in the factory settings. For an employee working in a noisy environment who uses the
headset as hearing protection, an upcoming call is reliably recognizable in this way. CheckBox
Headset
Ringing
if you want the sound call signal (ringing) to be played back through the phone's headset and
speakers; use
Headset Ringing only
if you want to play exclusively through the headset.
3.5
Function keys Shift 0-Shift 9
The keys - from the numeric keypad can trigger configurable functions in conjunction with the
shift key, such as for example the dialing of a destination number. In the factory settings, the assigned
function keys 1 – 10 are preset to "
Key not assigned
" and thus without effect. Via the main menu
Main
menu\User list\n UserName\Function key\f FctKeyNo\
open the Function key dialog shown below, in
whose various fields the desired behavior of the function key must be set.
Type: Key not assigned
Type: Destination no.
Type:
selecting the function type
Text:
[ Input Function
Name ]
Icon.:
[ Selecting a pictogram ]
Number:
entering destination number
Prepare.: Selection Off|On
The following table shows the current status of a configuration in which all 10 digit keys are to be
assigned the choice of a destination number. The configuration for the keys 0 and 1 has already been
done, the other digit keys are still pending.
Phy button
f-FctKeyNo
Type:
Text:
Icon:
Number:
Prepare:
10
Destination no.
F0
-
5010
Off
