Eaton M-Max series, Руководство по эксплуатации

Страница: 195 / 199

04/10 MN04020001Z-EN
List of parameters
191
User Set
S4.1 830
/
rw Display contrast 0 - 15 129 7
S4.2 831 - rw Restore factory defaults
(FS) 0 = Factory setting or changed value
1 = Restores factory settings for all
parameters 129 0
S4.3 832
/
ro Password 0000 - 9999 129 0000
PNU ID Access right Designation Value range Page FS
(P1.3) User
setting
RUN ro/rw
h Parameters marked with "M" (Monitor) are values
currently being measured, variables calculated from these
measured values, or status values from control signals.
The M parameters cannot be edited (only display values)
PNU ID Access right Designation Value range Page Display
format Measu
red
values
ro/rw
Display values
M1.1 1 ro Output frequency Hz 130 0.00
M1.2 25 ro Frequency reference value Hz 130 0.00
M1.3 2 ro Motor shaft speed rpm (calculated value, rpm) 130 0
M1.4 3 ro Motor current A 130 0.00
M1.5 4
ro
Motor torque % (calculated value) 130 0.0
M1.6 5 ro Motor power % (calculated value) 130 0.0
M1.7 6 ro Motor voltage V 130 0.0
M1.8 7 ro Intermediate DC voltage
circuit V 130 0.0
M1.9 8
ro
Unit temperature °C 130 0
M1.10 9 ro Motor temperature % (calculated value) 130 0
M1.11 13 ro Analog input 1 % 130 0.0
M1.12 14 ro Analog input 2 % 130 0.0
M1.13 26
ro
Analog output 1 % 130 0.0
M1.14 15 ro Digital input 1 - 3 DI1, DI2, DI3 status 130 0
M1.15 16 ro Digital input 4 - 6 DI4, DI5, DI6 status 130 0
M1.16 17 ro Digital output RO1, RO2, DO status 130 1
M1.17 20
ro
PID setpoint % 131 0.0
M1.18 21 ro PID feedback % 131 0.0
M1.19 22 ro PID error value % 131 0.0
M1.20 23 ro PID output % 131 0.0
M1.21 1480
ro
Counter, digital input - 131 0