8
Green Motion Building Pro
GREEN MOTION BUILDING PRO
www.eaton.com
Reference:
• EV charger
[A]
• Mounting plate
[C]
C
A
Place charger
[A]
on
mounting plate
[C]
and
insert retention screws
and rubber plugs .
STEP B-2
A
Retention screws
Rubber plugs
Reference:
• Mounting plate
[C]
• M6 screws
[F]
- x6
• Anchor
[E]
- x6
• Premium cord holster
[D]
B
Mount an EV charger to a wall
If you are planning to run external conduit
from the charger
[A],
offset the premium
holster
[D]
to allow clearance for conduit .
F
E
D
C
STEP B-1
Align mounting plate
[C]
on
wall and secure with four
M6 screws
[F].
If no stud is
available, use an anchor
[E]
(provided) . Align premium
holster
[D]
and secure with
two M6 screws
[F].
If no
stud is available, use an
anchor
[E]
(provided) .
!
Section B is instructions for mounting an EV charger to a wall. For mounting to a pedestal, skip to Section C.
This section details the instructions for various installation options . Failure to follow these instructions may result in
nonfunctional and/or unprotected equipment .
Eaton suggests following the appropriate ADA installation guidelines for commercial applications .
CAUTION: Ensure the EV charger’s dedicated upstream breaker handle is in the OFF position.
C
D
