![background image](http://html1.mh-extra.com/html/eaton/easy500-easy700/easy500-easy700_operating-instructions-manual_3938169058.webp)
3 Placing into operation
3.4 Creating your first circuit diagram
54
Operating instructions
05/10 MN05013003Z-EN
www.eaton.com
3.4.0.1 Starting point: Status display
easy activates the status display after it is powered up. The status display
indicates the switching state of the inputs and outputs and whether easy is
already running a circuit diagram.
▶
Press
OK
to switch to the main menu.
Press
OK
to switch to the next menu level, and press
ESC
to move one level
back.
In this case easy must be in STOP mode.
▶
Press
OK
2 × to enter the circuit diagram display via menu items
PROGRAM… h PROGRAM. This is where you will create the circuit
diagram.
3.4.1 Circuit diagram display
The circuit diagram display is currently empty. The cursor flashes at the top
left, which is where you will start to wire your circuit diagram. easy will
automatically propose the first contact
I1
.
Use the
ÍÚ
ú í
cursor buttons to move the cursor over the invisible circuit
diagram grid.
The first three double columns are the contact fields and the right-hand
columns form the coil field. Each line is a rung. easy automatically energizes
the first contact to voltage.
▶
Now try to wire up the following easy circuit diagram.
The switches
I1
and
I2
are at the input whilst I1 and I2 are the contacts for
the input terminals. Relay K1 is represented by the relay coil
Ä
Q1
. The symbol
Ä
identifies the coil's function, in this case a relay coil acting as a contactor.
Q1
is one of up to eight easy output relays in the basic unit.
...........…
… I…
MO 02:00
.......STOP
→
The examples were written without the use of expansion units.
If an expansion unit is connected, the Status display will first
show the status of the basic unit and then the status of the
expansion unit before showing the first selection menu.
PROGRAM...
STOP
å
RUN
PARAMETER
INFO
→
OK
has two other functions:
•
Press
OK
to save modified settings.
•
In the circuit diagram, you can also press
OK
to insert and
modify contacts and relay coils.
Â
êê
êê
êê
êêê
êê
êê
êê
êêê
êê
êê
êê
êêê
êê
êê
êê
êêê
↑
→
↓
←
I1-I2----
Ä
Q1
Содержание easy500, easy700
