manualshive.com logo in svg

Eaton easy500, easy700, Руководство по эксплуатации, Страница: 53 / 240

Поделиться
Скачать
Eaton easy500, easy700 Скачать руководство пользователя страница 53

2 Installation

2.8 Connecting bus systems

Operating instructions

05/10 MN05013003Z-EN

www.eaton.com

49

2.8 Connecting bus systems 

The easy-Link connection is designed in such a way that bus modules other 
than input/output expansions can also be connected. Special bus modules 
(gateways) are available for the relevant bus systems.

At present easy700 can communicate via the following bus systems or 
networks:

•

AS-Interface (Actuator-Sensor Interface)

•

Profibus-DP

•

CANopen

•

DeviceNET

•

Ethernet gateway.

The functionality of bus systems varies. The following generally applies:

•

As a minimum data exchange, the input data R1 to R16 and output data 
S1 to S8 can be exchanged, provided that the bus system supports this.

•

If the bus system or bus gateway is capable of this, function block, date, 
time parameters can be read and written via the bus. The states of 
inputs, outputs, markers can be read.

￫

easy-Link allows the connection of one device (expansion unit or 
bus module).

￫

The range and the functions of the bus gateways are being 
continually further developed. 
Our latest product range or Internet online catalogue contains 
the valid and available bus modules.

Содержание easy500, easy700

















































































































































































































































Отзывы:

Нет отзывов