Eaton easy500, easy700, Руководство по эксплуатации, Страница: 179 / 240

5 settings
5.4 Setting date and time
Operating instructions 05/10 MN05013003Z-EN www.eaton.com
175
5.4.4.3 Enter summer time start.
▶ Press OK to reach Entry mode for the summer time start rule.
The following menu appears:
This will open the menu for setting the time.
▶ Set the values for DST time change.
▶ Press the OK button to access the Entry mode.
•
ÍÚ
Select required value.
• ú í Select the position.
•
ÍÚ
Change the value of a parameter
• OK Save value.
• ESC Retain previous setting.
Press ESC to leave the DST setting display.
The above rule is the EU rule for the start of summer time.
SUMMER START
SUMMER END
AM L.
Æ
WD: SU
MONTH
TT.MM:--.03
æ
HH:MM:02:00
DIFF: +1:00
￫
The menu for the end of summer time has the same structure.
The values are now entered accordingly.
￫
The DIFF time difference value can be modified both for the
summer time setting and the winter time setting. The value is
always the same.
Summer time means a positive value + X:XX.
Winter time means a negative value – X:XX.
￫
Behavior on 29 February
If the time change is set for 29.02. at HH.MM, the switch time
for years that are not leap years will occur on 01.03 at HH.MM.
The DST time minus the time difference should not go into
28.02. The following applies:
00:15 is put back by –30 min. New time: 28.02. 23:45
￫
Behavior for summer time end on 01.01.
If 01.01. is selected for the end of summer time, ensure the
following:
The DST time minus the time difference should not go into
31.12. Otherwise the time will continue to run until the set time
minus the time difference 00:00 on the 01.01. The time will
then continue to run with 00:00.