Eaton DuraForce HMR Series, Руководство пользователя

Страница: 6 / 24

6
EATON
Duraforce HMR Conversion Procedures Manual E-MOPI-TM005-E July 2012
Blocking the Case Flushing Feature
Procedure to Disable the Shuttle Valve Assembly
Remove the M22 Plug with the 12mm Allen wrench.
Important
This procedure applies
to HMR Motors with
“Standard” or “Optimized”
Shuttle Valve Assemblies.
For unit with “Dampened”
Shuttle Valve Assembly
please move to “Procedure
to Disable the Purge Valve”
section near the end of this
document.
1
Remove the spring with the needle-nose pliers. The
safest way to remove spools, springs etc. like this is
with a pencil magnet
2
Remove the Washer and Shuttle Spool simultaneously
with the needle-nose pliers making sure the spool is
not damaged. The best way to remove spools like this
is with a pencil magnet, that way the spool doesn't get
damaged..
3
Remove the Washer from the Shuttle Spool. 4
Replace the Original Shuttle Spool with the Disabled
Shuttle Spool
5