10
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
INSTALLING CABLE/HOSE HANGERS
TO THE CABINET
Two included Cable/Hose Hangers
[L]
are optional and may be added to the cabinet if
desired. To do so:
• Remove four existing M5 screws from the upper right side of the Welder Cabinet
[A]
and set aside for re-use.
• Locate the Cable/Hose Hangers
[L]
with the offset up and outward and secure
with the previously removed M5 Screws
(FIG 5)
.
NOTE:
Upper Front Screw is longer.
FIG. 5
FIG. 5
FIG. 6
FIG. 6
FIG. 7
FIG. 7
FIG. 8
FIG. 8
CONTROL AND DISPLAY PANEL
FRONT UPPER PANEL (FIG 6)
1. Digital Displays.
The dual digital displays are your visual interface with the
machine. They show all welding parameters, menus, and settings.
2. Adjustment Knob.
Rotate Knob clockwise and counterclockwise to fine-adjust
parameters up and down, respectively. Press Knob and rotate to make coarse
adjustments. This is particularly helpful when making a large change in settings.
3. Menu Button.
Pressing the menu button will allow the Knob to change alternate
parameters. Long presses, meaning the press is held for approximately three
seconds, will open the user menu where in-depth process specific changes can
be made.
4. Foot Pedal Indicator.
Illuminates when the Foot Pedal is connected in TIG mode.
5. VRD Indicator.
Shows whether the Voltage Reducing Device (VRD) is turned on
or off for Stick Welding.
6. Mode Selection Button.
The Mode Selector Button cycles the Welding Mode you
are in. Current Mode is shown by the illuminated LED in the Mode’s box.
FRONT LOWER PANEL (FIG 7)
[a]
MIG Gun Power/Gas/Wire Feed Socket
[b]
MIG Gun Trigger Wire Connector
[c]
TIG Torch Power/Gas Connector
[d]
TIG Trigger and Foot Pedal Connector
[e]
Electrode Holder Connector
[f]
Ground Connector
REAR PANEL (FIG 8)
[g
] 240 VAC Power Cord
[h]
ON/OFF Switch
[j]
MIG Shielding Gas Connector
[k]
TIG Shielding Gas Connector
✓
Long Screw
Long Screw
✓
✓
✓
✓
22
11
66
44
55
✓
✓
✓
✓
✓
aa
bb
cc
dd
ee
ff
gg
✓
hh
jj
kk
✓
✓
✓
33
✓
Содержание MP200i
Страница 1: ...AC DC MP200i WELDER ASSEMBLY AND OPERATING INSTRUCTIONS Item 65375 ...
Страница 31: ...To order parts and supplies 800 343 9353 eastwood com 31 DATA CHART ...
Страница 38: ...38 Eastwood Technical Assistance 800 343 9353 tech eastwood com NOTES ...
Страница 39: ...To order parts and supplies 800 343 9353 eastwood com 39 NOTES ...